To begin, pinch (or push) your thumbs into the center of a ball of clay. Squeeze your thumb on the inside with your fingers on the outside of the pot. Continue squeezing and rotating the pot until the walls of the vessel are about 1/4 in. thick. Fix any cracks that form by firmly pinching together the void and smoothing it over. This part of the pot is what forms the base.
You may want to place the base in a hollow in the ground, or in a bowl shaped vessel which can be rotated easily by the potter as the pot is built up.
Now it is time to make the sides of your pinch pot. The sides are made with coils, which are rolled between the palms of the hands or rolled against a flat surface in a back and forth and center to ends direction. Coils range from 1/2 to 1 inch in thickness.
To be joined properly, the coils should be roughened using a moistened, stiff brush. This helps seal out any air when the coils are squeezed together, and helps keep the coil moist while it is being added to the pot.
Add a coil, one foot or longer, around the inside rim of the pot being held in its support.
The coils must be firmly joined to the pot or cracks will appear when the pot dries. Attach the coil to the pot using your thumb to press downward against the coil on the inside of the pot. At the same time pull upward with your fingers on the outside of the pot. This will actually weld the coils together. If the coils are not well joined, cracks will appear as pottery dries.
Join coils in a spiral direction until a rough form of the pot is made, or until the addition of more moist coils will cause the pot to slump under weight. If the pot dents when it is tapped, let it dry until it feels like leather, and does not dent easily.
When the pot is leather-hard, the pot is paddled with a cord-wrapped stick. Paddling helps compress and strengthen the clay and decorates the outside of the pot with cord marks. A smooth, flat scraping tool may be used on the pot to compress cracks
Decorating your Pot: Once your pot has dried, you can paint it any color of your choosing. Typically, pots used in the Japanese Tea ceremony have one side that is more ornamented – or more aesthetically pleasing – than the other side. When drinking tea, the host turns the tea bowl so the guest sees the most beautiful side while drinking.
Ceramic — by John Turner (October 17 2016 @ 11:39 am) Clay — by John Turner (October 17 2016 @ 11:38 am) Japanese tea ceremony — by John Turner (October 17 2016 @ 11:39 am) Lesson — by John Turner (October 17 2016 @ 11:39 am) Pinch pot — by John Turner (October 17 2016 @ 11:39 am) Zen — by John Turner (October 17 2016 @ 11:39 am)